Home > Windows 7 > Win 8.1 OS Disks Not Recognized In New Win 8.1 System But Ok In Win 7

Win 8.1 OS Disks Not Recognized In New Win 8.1 System But Ok In Win 7

Contents

Thanks dude.. PaperdocMar 10, 2010, 12:17 PM A few items to check:1. Are you facing any problem? towhog66Mar 27, 2010, 10:19 PM Paperdoc said: The problem may be you're not looking in just the right spot . navigate here

keerthana hi sir I have windows 8 product key but it not work my edition what I do ? The sata harddrive that I have has 250 gb and was working fine until suddenly it crashed and then windows could not load. It shows up in the BIOS and is available in the boot order, but doesn't show up in any shape or form in Disk Management.I'm going to try your solution and/or Alternatively (may even be a better choice), go to the website of your mobo maker to find and download the latest updated correct driver - that is, the one BOTH for

Hard Disk Not Detected In Windows 7 Installation

Mine shows Unallocated Space, now what do I do to get it to appear under Device Manager so I can format it? The upper one shows you only the devices Windows already knows how to use. You can create a second Partition or more in it if you want.) For this first Partition, make it the Primary or Active Partition, and NOT bootable because this drive is To the right will be one or more large sub-blocks representing Partitions already defined.

Once that is done, the Format process then writes a new set of data structures to the beginning of that Partition space. I phoned microsoft and told them that i suspect "they" or it thinks its being loaded twice and that it may be the reason. Bios recognizes drives but win 8.1 does not ( disk manager, raid configuration or file manager ) Monday, August 24, 2015 12:42 AM Reply | Quote Answers 0 Sign in to Windows 7 Install Cannot Find Hard Drive Drive was detected by BIOS but not by windows, That led me to this helpful forum.

Look for the ei.cfg file and open it in a text editor such as Notepad or Notepad++ (preferred). I would expect that the "Disk Management" tool would see all disk devices, even if they didn't have active volumes. It may cost some time, so please wait patiently. Therefore I Clean install using Windows 8 1st.

Try again later. Windows 10 Install Not Detecting Hard Drive Thanks. In the new Computer Management window expand "Storage" if necessary and click on Disk Management. Not that it matters for me because i did the windows store update instead (which worked) though I initially planned to do the former.

We Couldn't Find Any Drives Windows 10

Choose the NTFS File System option. To fix these problems, try installing the latest drivers for your computer’s chip set from the chip set manufacturer. Hard Disk Not Detected In Windows 7 Installation AnonymousSep 7, 2009, 7:31 AM I am user, not an expert, but i decided to install my own second drive (Hitachi 500 gb) in my Dell Dimension 9200 running Vista Home No Drives Were Found. Click Load Driver To Provide A Mass Storage Driver For Installation The dell manual made it appear that all I needed to do was plug and play (after I turned the drive on in BIOS - f2 at startup, go to drives,

That will most certainly destroy your data, and it may not solve your problem.2. check over here Holy shit. Since you are using Win 10 you will have the option of telling it to use either MBR or GPT Partitioning when you do this task with your new HDD. i can see it in bios. Windows 7 Install Not Recognizing Hard Drive

The SATA drive in BIOS appeared fine, heck, I even booted into Windows 7 setup CD and PARTITIONED and FORMATTED the drive then exited the Windows 7 setup. danny2000Jan 15, 2014, 12:06 PM You might have to enable boot to USB devices in the bios.Also, I have found that some USB ports are bootable and others are not on View the post How to Build Free Bootable Partition Manager to create a boot disk. his comment is here It only requires that the BIOS can recognize the HDD you are trying to test.

After all, I did see the driver load during startup, but could not find the drive in my computer. No Drivers Were Found Windows 7 Installation Usb And then you can run Windows setup program to see whether the error has been fixed. Full Format takes many hours!When you are done, reboot and your newly prepared hard drive should show up in My Computer as an empty unit ready for use.

It's a lot of work for a marginally passable upgrade.

If you do, when you are finished come back here and find the remainder shown as "Unallocated Space". A Full Format will do a Quick Format, then go though every sector of the drive and test it, marking off any faulty ones (very rare) so they won't be used. This is exactly what I needed to do. No Drives Were Found Windows 7 Install Ssd Go back to disk management.

Cahya Hi VG, months ago I did update my Vista Business to Windows 8 Pro which I bought from local reseller shop. For any SATA HDD the best choice is AHCI, or maybe Native SATA. For Professional edition which will be the best bet for most of the users, paste the following context into the ei.cfg file. weblink And you already know the end of the story.

gaurav hi vishal, i need your help. A SSD, and your standard hard drive. if u do try win7 and vista disc and see if it show the hdd at the install process part kevin85219Nov 1, 2009, 10:30 PM I have a Hitachi Deskstar 500GB Then we can help further.

Thing is, both drives were FAT32, 7.45 GB free space but only the Kingston drive was detected.The Sandisk drive was not. I'm not sure what else I can do. On most machines, when you turn it on you hold down a key, usually the "Del" key, and wait for a few parts of the POST displays to pass by until If hard disk is not detected during installing Windows on an existing system, you can try changing disk controller mode from IDE to AHCI to fix the error.

Here we choose to clean Disk 2 by typing the following commands (each type ends with pressing on Enter key): Diskpart List disk Select disk 2 Clean (using Clean command in What does it show for the File system? SC decaJan 24, 2010, 7:01 AM Still Nothing guys.............. Do you know any solution to this?

and try installing windows on it from there... NOTE that Vista and Win 7 already have the AHCI drivers and this is NOT an issue for these OS's.But now suppose you want to use the new drives as a Next, boot the computer from MiniTool Partition Wizard Boot Disk, and use its "Delete All Partitions" feature to clean the target disk. Note that any HDD units not assigned to a RAID array will remain, by default, as non-RAID stand-alone drive units.3.

chirag Hi Vishal, Thank you for what you do, your article on how to transfer files from ssd to hdd for windows 8 were awesome. Guess what, it still wouldn't appear in Windows 7!This is a bug. The package i bought includes both 32 and 64 bit but only one key no. 4gigs ram, intel pentium duel core 5300 and whatever else you need to know to tell Jimmy I followed the instructions above.

I purchased 2 storage drives.